UV Protection Oil Tints

Tinted UV Protection Oils are lightly coloured oils for exterior timber joinery, timber garden furniture, pergolas, timber doors, fascias and other trim. Not suitable for use on timber decks. The microporous surface allows the wood to breathe, thereby reducing swelling and shrinkage. The water repellant surface will not crack, peel, blister or flake. The finish prevents the greying process on vertical surfaces with a UV protection factor of 12 in comparison to untreated wood.

The finish contains biocides, which are active ingredients that prevent mould, algae and fungal attack. As such, they should not be used internally, or externally on tables etc where may be eaten, or timber decking which will be walked upon. 

Available in 5 lightly tinted colour tones plus "Natural". UV Protection Oil Natural is optimally balanced with white pigments to retain the natural character of light coloured timbers such as pine and oak. It is not recommended for use on darker timbers such as kwila or jarrah etc, as the white pigment may give the timber a chalky appearance.

Can be used as a base coat of colour with a clear top coat of 410 or 420. This will give a transparent effect. For a longer recoat time, a 2 coat application of colour is recommended. 2 coats will make the finish more opaque, but it will last longer. 

Coverage is approximately 20 square metres per litre, but this may vary depending on timber type and timber dryness. Recoat is easy. Generally, a wash down and clean is all that is needed, followed by one rejuvenation coat once the timber is dry. Where the timber has been left to grey off, the wood will need rejuvenation with a product such as Osmo's Wood Reviver gel.

Can size / Approximate coverage

  • 750ml          8 sqm with 2 coats
  • 2.5 litres     50 sqm with 2 coats