Polyx®-Oil Tints

Polyx®-Oil Tints is normal Polyx®-Oil satin, containing a small amount of coloured tint. It should not be considered as a product for staining timber, but as a finish which will give a light washed effect, creating an even tone to a timber's grain. For example, the Polyx®-Oil white tint, will reduce the "yellowness" of a timber such as pine and macrocarpa, as well as reducing variations in grain colour to provide a more harmonious finish.

CLICK HERE TO VIEW THE COLOUR CHART 

For interior use only. Suitable for use on timber floors and furniture and general interior timbers such as panelling, furniture and timber ceilings etc. Polyx®-Oil Tints is suitable for use on timbers to which normal Oil can be applied. It is not recommended for use on timbers with high oil and resin content such as Matai, Totara, Kwila or Spotted Gum

Only one coat should be applied to timber flooring, followed by one coat of normal Polyx®-Oil. On non traffic areas such as wall panels, sarking etc, two coats of Polyx®-Oil Tints can be applied as the stand alone finish. 

Where a deeper colour is required, we recommend using one of OSMO's Oil Stains or Woodwax Finish colours rather than Polyx®-Oil Tints .

Can Sizes /Approximate Coverage

  • 750ml       9 sqm with 2 coats
  • 2.5 litres  30sqm with 2 coats
  • 10 litres  120sqm with 2 coats (10 litres are available in White 3040 and Black 3075 only)